Innokin T22 Pro Kit [Matte Black]

Product Information

The Endura T22 Pro comes with the Prism T18E Pro tank. This is an updated version of the T18E Prism tank that is found on the Endura T18E kit. Some of the updates include a plastic 510 drip tip which many of the leading vape brands have started to feature on their MTL tanks. The previous prism tank used a non-standard drip tip so this new addition makes the T18E Pro tank compatible with a wide range of mouthpieces. It might not be as cheap as other kits, but it should still fit within many vapers budgets, and with the pedigree Innokin commands, you can be confident that it will last. Please try opening up your airflow more. The more airflow that passes through the coil, the cooler the coil will be, and the less likely you will get a burnt taste.

Make sure to prime your coil upon first use. 1 drop of e-liquid per cotton juice port is enough. Once primed, allow the coil to stand in a 3/4ths full tank for at least 15 minutes before vaping. The drip-tip is now constructed from a non-conductive acrylic, eschewing the previous steel tip, which was far less comfortable against your lips.When the battery is low, the LED indicator will flash red. To charge the battery, connect the device to a USB charger using the included micro-USB cable. The LED indicator will light up red while the battery is charging and will turn green when it is fully charged. The classic chunky style of this modern e-cigarette should make for an attractive proposition to first-time vapers. The ability to charge using the USB-C connection ensures the fastest possible battery charge with no downtime, since you can continue to use the product as it charges, otherwise known as pass through feature! The Innokin T22 Endura Pro is made with high-quality aluminium alloy and zinc alloy and can fire a resistance range between 0.6 ohms to 3.5 ohms It is best to empty the tank prior to changing the coil or at least have some tissue in the area as it is likely to dump out its liquid. However I did find lying the tank on its side when removing the coil didn’t spill as much liquid. Even turning the tank upside down resulted in liquid spewing out of the drip tip – so bear this in mind! Please be sure to inspect your battery before use to ensure it is not damaged including tears or rips in the battery wrap. Discontinue use immediately if battery is damaged. If the kit included just the 1.7 and 1.6ohm coils – this would be perfection. I think Innokin should retire the 1.5ohm coil from new kits now – it is still a good coil – but it seems dated and dull compared with the newer design coils.

The Innokin T22 Pro delivers moderate-sized puffs, replicating the cigarette experience very accurately and never producing an anti-social amount of vapour.The Innokin Endura T22 Pro is a powerful addition to the Endura range, boasting an upgraded battery, fast USB-C charging and a new 1.7ohm Pro coil for the satisfying mouth-to-lung experience that the range is renowned for. for me this setting with this coil is the optimum performance for the whole kit I love it. Plenty of flavour, plenty of throat hit and a good warm vapour. At times this felt a bit hot if I didn’t have the drip tip in my mouth far enough – so if you find it is too warm put the tip a bit further into your lips to shield them. Man that whole sentence just sounds like filth… The old T22 was mainly sold on its battery life, with 2000mAh being quite a lot larger than most MTL kits of its size. The front side of the mod now features a wattage level display system by way of four white LEDs, an understated yet informative display which wastes no effort or power on detailed color screens. Batteries are covered by our six-month warranty. If your battery is still under warranty, you can exchange it for an operational one. This warranty applies to the product under normal use. In the event you need to exchange your Innokin product, simply complete theReplacement Merchandise Authorization (RMA)form online.

Sadly the airflow is not adjustable for this kit so the airflow provided will depend only on the coil installed. Don't take long draws or vaping with very short intervals between two drags. Each puff time shall be 4 seconds at most. The 1.7Ω coil looks to be a traditional vertical round wire build, I don’t know if it’s dual or single strand though, not that it matters as long as it delivers.

Why does my coil or tank have a burnt taste?

Finally on the display side is the USB Type C port I had no issues at all charging. Prism T18E Pro Tank this is slightly warmer and quite dry I would imagine this setting would result in a lower coil life. Not as enjoyable as the 12.5W setting. Innokin Endura T22 Pro Coil Summary At the heart of the Innokin Endura T22 Pro Vape Kit lies a powerful and long-lasting 3000mAh built-in battery, ensuring you can enjoy uninterrupted vaping sessions throughout the day. This substantial battery capacity sets the T22 Pro apart from its predecessors, allowing for extended periods of use without the need for frequent recharging. Additionally, the inclusion of a USB-C charging port facilitates faster charging times, ensuring minimal downtime between sessions. As I am a Pinkophile obviously I was drawn to the Rose Gold device! Pink drip tip is my own – didn’t come with kit

Tips for new nicotine users: Sub-ohm or low resistance atomizers produce a higher throat hit than standard,high resistance atomizers. We strongly suggest 3 to 6mg eLiquid or lower with sub-ohm or low resistance atomizer heads. Preference may vary depending on the user and frequency of use. It was a great coil when it came out and even still shone in newer kits, but the 1.6 and 1.7 ohm coils really have raced ahead in performance.To achieve optimal performance with the T22 Pro kit, it is recommended to use 50/50 nicotine salt e-liquids with a nicotine strength ranging from 10-20mg. The balanced ratio of propylene glycol (PG) to vegetable glycerin (VG) in 50/50 e-liquids ensures smooth vapor production and a satisfying throat hit. However, the T22 Pro kit is also compatible with high PG e-liquids ranging from 3-12mg in nicotine strength, allowing users to explore a wider range of flavors and nicotine options. The Innobar C1 is the perfect alternative to the Endura S1 if you find e-liquid refilling messy and cumbersome. The C1’s pods are already pre-filled, with 16 flavours to choose from. What makes it stand out is it doesn’t use regular PG/VG vape juice, and instead uses water-based e-liquid! Water-based e-liquids deliver smoother vapour and faster satisfaction compared to normal e-liquids, so it’s worth trying if you find traditional vapes a little harsh. Paired with an advanced 1.1ohm mesh coil and 3.6V constant output, you’ll get to enjoy smooth and unmatched flavour with every puff. The T22 Pro boasts a variable wattage feature, giving users the ability to adjust their preferred power output according to their vaping preferences. With four available power levels (9.5W, 11W, 12.5W, and 13.5W), vapers can easily tailor their experience to achieve the desired intensity and flavor production.